A ladder was set up. Walk around the room and remove loose paint and debris from the ceiling with a metal paint scraper. In a corner, the ceiling is marked with chalk. Move the ladder around the corner, across the room, and hold the chalk line alignment in the corner across the ceiling. The chalk line moves to another corner and repeats the process to create an "X" PVC ceiling with a beautiful appearance and a wide variety of styles that you may find more difficult to choose than the actual installed tiles. Most of the PVC tiles have been finished with matte white paintings matching a real flower board. Planning is key to successful installation of PVC ceiling in your home.

A ladder was set up. Walk around the room and remove loose paint and debris from the ceiling with a metal paint scraper.

In a corner, the ceiling is marked with chalk. Move the ladder around the corner, across the room, and hold the chalk line alignment in the corner across the ceiling. The chalk line moves to another corner and repeats the process to create an "X" through the ceiling.

Measure the distance from the center of the tape measure "X" on the wall, and move the stairs at one end of the room. Measure the "X" of the distance you measure across the wall place a pencil marking you as a carpenter to measure the upper limit of the dimension. Move to the room at the other end and repeat the process.

De chalk line ends with a carpenter's pencil mark, using a pushpin. Move to another pencil mark, align with the chalk line of the other pencil mark and snap half of the dividing line.

Go to the paint pot and pour in the contact cement.

The back of the PVC ceiling is marked with a 4-inch paint roller on the ceiling contact adhesive.

Align one of the glued pencil lines with the edge of the PVC ceiling. Tile the ceiling tiles according to. Follow pencil line, press PVC ceiling.

Keep attaching until you reach a point where you need to cut the tiles.

Measure the distance from the last row of porcelain brick walls at the edge.

Cutting length of plastic floor tile, art knife. Glue and tile into place as described previously.

Work overhead to ensure that no debris enters your eyes and wear safety goggles.